ISSA Codes - Quick Reference Guide
ISSA is the international association representing nearly 2,000 ship suppliers throughout the world.
We have 43 national associations of ship suppliers as full ISSA members and associate members in 52 other countries where no national association exists.
The ISSA Ship Stores Catalogue is our premier publication. In the present 2013 Edition you will find every conceivable item you might need on board.
| ISSA Part No | Trelawny Part No | Description |
| 55.077.01 | 340.TN/S/110 | Trident Neptune 110V 50/60Hz |
| 55.077.02 | 340.TN/S/220 | Trident Neptune 220V 50/60Hz |
| 55.077.03 | 340.490/S | Trident Neptune Kit Air Power |
| 55.077.05 | 340.285 | Flexible Drive 9Ft. x 5/8” Dia |
| 55.078.01 | 340.55 | Heavy Duty Scaling Head |
| 55.078.02 | 340.551/2 | Side Plate Assorted Heads 2 of |
| 55.078.03 | 340.552 | Bolt for 340.550/340.548 Heads |
| 55.078.04 | 340.584/50 | Washer For 340.550/340.548 x50 |
| 55.078.05 | 340.553 | Pins |
| 55.078.06 | 340.347 | Chipping Leaf for Scaler |
| 55.082.01 | 340.581 | 6-Cutter Scaling Head |
| 55.082.02 | 340.575/2 | Side Plate For 340.581 2off |
| 55.082.03 | 340.581/A | Bolt kit 340.581 Head. |
| 55.082.04 | 340.332 | Cutter Wheel |
| 55.082.05 | 340.583 | Pins For 6-Cutter Head |
| 55.084.01 | 340.163 | Twisted Knot Brush 6”D x 5/8”B |
| 55.084.02 | 340.559 | Brush Arbor for 340.163 Brush |
| 55.084.03 | 340.16 | Power Brush 6” Dia. |
| 55.084.04 | 340.558 | Brush Arbor for 340.160 Brush |
| 55.084.05 | 340.167 | Twist Knot Cup Brush 5/8” Bore |
| 55.084.06 | 340.557 | Brush Arbor for 340.166 Brush |
| 55.084.07 | 340.166 | Crimp Wire Cup Brush 5/8”Bore |
| 55.084.08 | 340.557 | Brush Arbor for 340.166 Brush |
| 55.085.10 | 342.HY50 | Hydraflex Kit |
| 55.085.11 | 342.HY50T | Hydraflex Kit with Base (Red) |
| 55.085.12 | 342.HY01 | Hydraflex Hold Cleaner TSPT |
| 55.085.13 | 342.HY02 | Hydraflex Stand (Red) |
| 55.085.14 | 342.HY03 | Hose Coupling Water 2 1/2x21/2 |
| 55.085.15 | 342.HY04 | Hose Coupling Water 2 1/2”x2” |
| 55.085.16 | 342.HY05 | Adaptor 2” BSP Instantaneous |
| 55.085.17 | 342.HY07 | 2” Hydraflex Ball Valve |
| 55.085.18 | 342.HY60A | Hydraflex Base Assembly |
| 55.086.00 | 170.405 | 4” Right Angle Air Grinder |
| 55.089.01 | 111.1 | 1B Needle Scaler |
| 55.089.02 | 114.12 | 1B Chipper |
| 55.089.03 | 403.1312 | 3mm Be/Copper Needles x 12 |
| 55.089.04 | 453.111 | 3mm Flat Needles x 100 |
| 55.089.05 | 453.211 | 3mm Chisel Needles x 100 |
| 55.089.06 | 453.311 | 3mm Pointed Needles x 100 |
| 55.089.07 | 452.111 | 2mm Flat Needles x 100 |
| 55.091.07 | 121.2 | 2B Needle Scaler |
| 55.091.08 | 124.22 | 2B Chisel Scaler |
| 55.091.10 | 123.21 | 2BPG Needle Scaler |
| 55.091.11 | 125.23 | 2BPG Chisel Scaler |
| 55.091.12 | 403.1319 | 3mm Be/Copper Needles x 19 |
| 55.091.13 | 453.111 | 3mm Flat Needles x 100 |
| 55.091.14 | 453.211 | 3mm Chisel Needles x 100 |
| 55.091.15 | 453.311 | 3mm Pointed Needles x 100 |
| 55.091.16 | 452.111 | 2mm Flat Needles x 100 |
| 55.091.17 | 139.2107 | 2BPG TVS N/Scaler NPT |
| 55.091.20 | 131.3 | 3B Needle Scaler |
| 55.091.21 | 134.32 | 3B Chisel Scaler |
| 55.091.21 | 134.32 | 3B Chisel Scaler |
| 55.091.22 | 133.31 | 3BPG Needle Scaler |
| 55.091.23 | 135.33 | 3BPG Chisel Scaler |
| 55.091.24 | 403.1328 | 3mm Be/Copper Needles x 28 |
| 55.091.25 | 453.111 | 3mm Flat Needles x 100 |
| 55.091.25 | 453.111 | 3mm Flat Needles x 100 |
| 55.091.25 | 453.111 | 3mm Flat Needles x 100 |
| 55.091.26 | 453.211 | 3mm Chisel Needles x 100 |
| 55.091.26 | 453.211 | 3mm Chisel Needles x 100 |
| 55.091.26 | 453.211 | 3mm Chisel Needles x 100 |
| 55.091.27 | 453.311 | 3mm Pointed Needles x 100 |
| 55.091.27 | 453.311 | 3mm Pointed Needles x 100 |
| 55.091.27 | 453.311 | 3mm Pointed Needles x 100 |
| 55.091.28 | 452.111 | 2mm Flat Needles x 100 |
| ISSA Part No | Trelawny Part No | Description |
| 55.091.39 | 419.3003 | 1/2” Chisel Holder VL303 |
| 55.091.40 | 196.3003 | VL303 Challenger Needle Scaler |
| 55.091.41 | 196.3203 | VL303 Challenger Chisel Scaler |
| 55.091.63 | 196.2003 | VL203 Needle Scaler |
| 55.091.64 | 196.2203 | VL203 Challenger Chisel Scaler |
| 55.091.65 | 139.2003 | VL203 TVS Needle Scaler Kit |
| 55.091.66 | 418.2003 | TVS Vacuum Take-off VL203/223 |
| 55.091.67 | 196.2103 | VL223 Inline Needle Scaler |
| 55.091.68 | 196.2213 | VL223 Inline Chisel Scaler |
| 55.091.69 | 139.2103 | VL223 TVS Needle Scaler Kit |
| 55.091.70 | 418.2003 | TVS Vacuum Take-off VL203/223 |
| 55.091.72 | 720.3003 | VL303 Arrester Clamp Assy |
| 55.091.73 | 815.555 | Whip-check (hose retaining) |
| 55.092.01 | 704.1101 | Chisel 1/2” sq 7x3/4 |
| 55.092.02 | 704.1107 | Chisel 1/2” sq. 10x3/4 |
| 55.092.03 | 704.1103 | Chisel 1/2” sq. 7x2.1/2 |
| 55.092.05 | 704.2105 | Chisel 1/2” sq cranked |
| 55.092.08 | 704.111 | Chisel 1/2” sq.7x2 Alu.Br |
| 55.092.20 | 704.3101 | Vibro-Lo Chisel 1/2”Sq x 3/4” |
| 55.092.21 | 704.3103 | Vibro-Lo Chisel 1/2” 7x2.1/2” |
| 55.092.22 | 704.311 | Vibro-Lo Chisel 1/2”Sq Al.Brnz |
| 55.092.23 | 704.311 | Vibro-Lo Chisel 1/2”Sq Al.Brnz |
| 55.092.30 | 704.3205 | Vibro-Lo 1/2” Chisel Cranked |
| 55.092.31 | 704.3107 | Vibro-Lo 1/2”Sq Chisel 10x3/4” |
| 55.093.01 | 151.51 | SF1 Single Scaler |
| 55.093.10 | 153.53 | SF3 Triple Head Scaler |
| 55.093.12 | 426.5351 | Scaler Head Carbide X Form |
| 55.093.13 | 606.5303 | Scaler Head BeCu |
| 55.093.20 | 196.5095 | SF1 VL S/Scaler Taper Piston |
| 55.094.01 | 136.32 | Long Reach Scaler 2ft |
| 55.094.02 | 136.34 | Long Reach Scaler 4ft |
| 55.094.03 | 136.3498 | Long Reach Lite 4ft |
| 55.094.04 | 136.35 | Long Reach Scaler 5ft |
| 55.094.05 | 136.3598 | Long Reach Lite 5ft |
| 55.094.06 | 136.36 | Long Reach Scaler 6ft |
| 55.094.07 | 136.3698 | Long Reach Lite 6ft |
| 55.094.09 | 431.3504 | Scraper S/A 100mm 5/8”Hex. |
| 55.094.10 | 431.3508 | Scraper S/A 200mm 5/8 Hex |
| 55.094.11 | 705.1106 | Chisel 5/8” Hex. 9x2 |
| 55.094.12 | 431.3512 | Scraper S/A 300mm 5/8 Hex |
| 55.094.14 | 415.3532 | 3mm Needle Attach For L.R. |
| 55.094.15 | 705.1102 | Chisel 5/8” Hex. 8x4 |
| 55.094.16 | 705.11 | Chisel 5/8” Hex 9x2 Alu.Br |
| 55.094.17 | 705.1112 | Chisel 5/8” Hex 8x4 Alu-Br |
| 55.094.22 | 705.2102 | Chisel 5/8” Hex 4” cranked |
| 55.094.23 | 708.11 | Comb Holder 5/8” Hex. |
| 55.094.24 | 708.1101 | Comb 1 1/2” Wide |
| 55.094.25 | 431.3904 | Scraper S/A 100mm Bevelled |
| 55.094.26 | 439.3524 | Blade Pack 100mm x5 (bevel) |
| 55.094.27 | 439.3522 | Blade Pack 300mm x4 (Bevel) |
| 55.095.01 | 159.591 | SF11 Scale Force 11 Scaler |
| 55.095.02 | 159.593 | SF11 Beryllium Spark-Res Heads |
| 55.095.05 | 426.5351 | Scaler Head Carbide X Form |
| 55.095.06 | 606.5303 | Scaler Head BeCu |
| 55.096.01 | 320.2012T | TFP200 Air TCT |
| 55.096.02 | 320.2002T | TFP200 110v 1ph 50Hz TCT |
| 55.096.10 | 320.55 | 5 Point TCT Cutter |
| 55.096.11 | 320.3658 | Star Cutter |
| 55.096.12 | 320.512 | Beam Cutter Single |
| 55.096.13 | 320.962 | Twist Knot Wire Brush Assembly |
| 55.096.14 | 320.961 | Crimped Wire Brush Assembly |
| 55.096.16 | 320.002H | Drum H/Duty c/w 12mm Shafts |
| 55.096.18 | 320.002 | Flail Shaft 12mm |
| 55.098.01 | 194.0205 | 2” PPT Air C - Flaps |
| 55.098.02 | 194.C205 | 2” PPT Air Star Cutters |
| 55.098.03 | 195.C221 | 2” PPT Elec 230v Star Cutters |
| 55.098.04 | 194.0405 | 4” PPT Air C Flaps |
| 55.098.05 | 194.C405 | 4” PPT Air with Star Cutters |
| 55.098.06 | 438.0205 | 2” Rotopeen Hub (inc pins) |
| 55.098.07 | 438.0405 | 4” Rotopeen Hub (inc pins) |
| 55.098.08 | 438.0409 | 4” Cutter Hub Assembly |
| 55.098.09 | 438.0209 | 2” Cutter Hub Assembly |
| 55.098.10 | 312.S200 | Star Cutter |
| 55.098.11 | 312.R200 | Beam Cutter |
| 55.098.12 | 312.MRPC | 3M 2” Heavy Duty Rotopeen/C |