|
Consumable |
Part Number |
Description |
|
 |
Chisel |
704.1101 |
Weld spatter removal. |
|
 |
Chisel |
704.1103 |
Wide flat chisel for the removal of peeling paint and rust. |
|
 |
Chisel |
704.1106 |
Mortar removal for re-pointing brickwork. |
|
 |
Chisel |
704.1107 |
Flat chisel for weld spatter and sand cast cleaning. |
|
 |
Chisel |
704.1110 |
Spark resistant Aluminium Bronze for use in hazardous areas. |
 |
 |
Chisel |
704.1112 |
Concrete chipping. |
|
 |
Chisel |
704.2105 |
Weld flux and thick coating removal. |
|
 |
Needles - Chisel Tip |
413.2119 |
6 sets x 19 3mm - These needles will clean the same materials as a pointed tip, but will leave a light surface marking. |
|
 |
Needles - Flat Tip |
413.1119 |
6 sets x 19 3mm - The flat tips needles will reduce marking on metal surfaces and can actually give a polishing effect. For use on thin gauge metals and any surface where a light treatment is required. 2mm needle used on a welded joint produces a similar effect to shot peening, reducing stress in the weld. |
|
 |
Needles - Pointed Tip |
413.3119 |
6 sets x 19 3mm - Sharpened to a conical point, these are the most effective in breaking through very hard scale on materials where some surface indentation is permissible - or where roughening or keying the surface is actually desirable. |
|
 |
Needles - Spark Resistant |
403.1319 |
19 x 3mm - Available in 3mm flat tip only for use in hazardous areas. For VL203/223 only. |
 |
 |
Needles - Stainless Steel |
453.1207 |
100 x 3mm - Available in 3mm flat tip only, to be used in applications such as refurbishment of food processing areas of high humidity where the corrosive effect on needles would be prohibitive. Used on decorative concrete surfaces where contamination of the surface from carbon steel is undesirable |
|
 |
Needles - Stainless Steel |
443.1207 |
500 x 3mm |
|