Floor Grinder Accessories Application Guide

Key

Preferred method to produce maximum performance or productivity rates for most job applications

Acceptable performance or productivity rate for most job applications

Limited performance productivity rates for most job applications

 
Accessories Abrasive block Brush infill Scarifying block Diamond grinding block Diamond grinding disc - Soft bond Diamond grinding disc - Universal bond Diamond grinding disc - Hard bond
Grind concrete floors - -
Roughen concrete floors - - - -
Roughen tile/vinyl floors - - - - - -
Clean concrete floors - - -
Remove floor urethanes - - - -
Remove floor epoxies - - -
Remove floor paints - - - -
Remove material build- ups - - - - -
Remove ice & oil build up - - - - -
Grind asphaltic surfaces - - - - -
Comments Used to remove up to 2mm of material water and sand slurry will minimize clogging problems. C24 stone is most popular. Removal rates can approach 40 Square metres / hour. Use C60 & C120 on terrazzo and marble surfaces. Service life is shorter with coarse grit stones. Add external weight to floor grinder to increase productivity. Removes grease, wax, food by-products & rubber carpet backing. Roughen linoleum and vinyl tiles prior to application of a new coating. Transfer brushes between each disc every hour to remove directional set. DO NOT add external weight to floor grinder to increase productivity. Remove varnish, paint, epoxy, fibreglass & grout. Roughen floors prior to coating applications. Beam flail minimizes damage to surface cap. Add external weight to floor grinder to increase productivity and flail penetration into the surface cap. Alternative to Carborundum Abrasive Blocks. Suitable to remove paint, high spot reduction and general concrete grinding. Ideal for larger grinding projects. Softer matrix provides more aggressive action for diamond grits. Resist clogging better than stones and delivers up to 15 times greater service life. Removal rates for 2mm of concrete can approach 50 Square metres / hour. Add external weight to floor grinder to increase productivity. Universal medium matrix, a good media for grinding most concrete types . Add weight to floor grinder to increase productivity. Harder matrix allows for grinding of softer abrasive surfaces such as, asphalt & limestone ahead of re-coating. Add external weight to increase grinder productivity.

Diamond plate adaptor kit (350.9142) – if the machine is supplied with holding plates and blocks, the diamond plate adaptor kit is required for use with diamond discs and alternatively if supplied initially with diamond discs 350.00CDR/CDL are required for alternative accessories



Floor Planer Accessories Application Guide

Key

Best method to produce maximum performance or productivity rates for most job applications

Satisfactory performance or productivity rate for most job applications

Non satisfactory (or less satisfying) performance productivity rates for most job applications

Accessories
Wire brush

Beam cutters 320.5120

Star cutters 320.3658

Tungsten Carbide Tipped cutters 320.5500

Milling cutters 320.5600 (22mm) 320.5650 (11mm)

Tungsten Carbide Tipped cutters 320.5500
Drum Assembly
320.9620

320.1020SB

320.1020SS

320.1020ST

320.1020SM

320.002G
Applications            
Steel preperation guide Light burnishing     Heavy scaling    
Comments Best for finish cleaning & polishing on steel. Can be used for light concrete deposit. Removal from steel shuttering Best for light paint/corrosion removal as they minimize the damage to surface substrate Good for the removal of mastics & rubberised coatings, faster cutter wear due to star points Best for roughing concrete. Aggressive on heavy corrosion. Least favourable for light duty scale and paint removal Removal of plastic road markings without penetrating the surface cap. Ideal for concrete grooving of farmyards, public highways to create non-slip surface
Bright metal & light rust removal from tanks & deck areas - - - -
Removal of paints & coatings from tanks & deck areas - - -
Removal of non- slip paints, epoxies, mastics & rubberised coatings from steel tanks & deck areas - - -
Removal of heavy rust & scale build up in tanks & deck areas - - -
Removal of paint, dirt build up & ice deposits from concrete floors - -
Roughing / keying texturing concrete. Removal of laitance excess concrete or asphalt - - - -
Removal of thermoplastic road, runway markings - -
Removal of roofing felts, bituminous & rubber deposits - - -
Concrete grooving applications for non-slip surfaces - - - - -